The AWD-5000-FX series dyno is the world’s most affordable mechanically linked AWD chassis dynamometer system. The front portion of the AWD unit is a 2WD 5000 Series unit and is linked with a massive Gates Poly Chain® GT3® belt to a rear bed of 6 linked rollers with 36”-86” Inch track width. The AWD 5000-FX dynamometer is capable of supporting speeds up to 175+ MPH and 2000+ HP. The maximum axle weight is 6,500 lbs and the track width range is 36”-86”. The AWD 5000-FX was designed for a variety of different testing scenarios – FWD/RWD Cars, Sport Compacts, Motorcycles and ATV’s. It is equipped with a Frenelsa eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. • View in real-time torque/horsepower output, at steady and changing speeds, to instantly evaluate changes you’ve made to the engine’s fuel or timing maps. • Diagnose engine and drivetrain problems. • Troubleshoot drivability issues. • Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. The AWD-5000-FX can be operated in AWD Mode while testing two-wheel drive vehicles. This process allows the non-driven axle to be spun by the dynamometer rollers at the same speed as the driven axle, eliminating the speed differential that occurs on two-wheel drive dynamometers and insures the safety of the vehicles differential.
TORQUE: 5000 ft lbs MAX SPEED: 175 MPH (155 linked) ROLL DIAMETER: 8.5 AIR REQUIREMENTS: 110 POWER REQUIREMENTS: 220/240/280
LED Light Bar