Are you tight on shop space? Landlord won't let you dig a pit? Want to go to car shows, pit-side at a track or portable and go to other speed shops? Dynocom recognized the need to make units portable and has introduced a truly high performance, DOT approved trailer/dynamometer system. This is a heavy duty dyno with a heavy duty trailer: 12,000 GVW towing weight is 9000 lbs Trailer is 41-42 inches high x 102” inches wide 24” foot level deck the ramps extend 3” feet on each side (total length fully extended is 26” feet) Ramps on both side of the trailer prevent you from having to reverse off the dyno - simply drive forward. You can use any standard truck with a ball to tow these trailers or available in a Gooseneck.
TORQUE: 15,000 INERTIA: 1800 lbs MAX SPEED: 240+ MPH ROLL DIAMETER: 24 Inch AIR REQUIREMENTS: 60 PSI POWER REQUIREMENTS: 220/240/280
DC 5 Gas Analyzer: Look no farther than the DC-5 GAS for your gas analyzer needs. This all-in-one, portable machine meets BAR and OIML standards and will provide you with an emission diagnostics and trouble-shooting tool that will drastically reduce your diagnostic and tune-up time.
DC-5 GAS analyzer measures five emission gases, including Hydrocarbons (HC), Carbon Monoxide (CO), Carbon Dioxide (CO2), Oxygen (O2) and Oxides of Nitrogen (NOX). Based on gas concentrations,
DC-5 GAS will calculate the Air to Fuel Ratio (AFR), Lambda () and Grams per
Mile (GPM). It will also provide a read-out for an optional Tachometer that handles up to 30,000 RPM. With this much information in one place, you can diagnose and tune any fuel-related issues while having all of the relevant information displayed in six super-bright, oversized displays.
In addition to the above features, you can measure exhaust gases from two tail pipes and average the readings or set up an exhaust dilution value to warn you if there are air-leaks in the exhaust system. With the standard 12VDC jack in addition to the 110VAC-230VAC, you can connect the DC-5 GAS to the car battery or cigarette lighter and take it along for a drive test to see how the vehicle behaves in real driving situations. You can use the internal record feature to store all eight parameters and download the information to a PC when you return.
Drag-Tree: Now you can perform 1/4 mile drag simulations on the dyno. Within a 1/10th of a second accuracy the drag tree features dual Pre-stage & Stage bulbs and the flood lamps are spaced in accordance to NHRA/IHRA National Event trees. Our trees are made of 100% structural aluminum with a 25 lb steel base stand.
INCLUDES: 6 foot aluminum tree, Incandescent Flood Lamps, 40 ft cable, 25 lb base stand, cigarette lighter adapter for the eliminator practice tree, and 2 vehicle connections (so you can sit in your race car and practice). Also includes special Dynocom harness that plugs directly into the Dynocom JBOX.
Wireless OBDII : Our wireless module for OBDII Applications provides real time data from the OBDII port on all 1996 and newer vehicles. This data is available to be viewed live in the dynamometer software and is also recorded into the dyno run.
You can view all support channels of the OBDII data, such as spark advance, throttle position, engine coolant temperatures, inlet air temperature, calculated load, and numerous other parameters right along side your dyno results.