The AWD 15,000 series is the world’s best built AWD chassis dynamometer in its class at any price. The AWD 15,000 series is capable of supporting speeds up to 240+MPH and 4600+ HP. The maximum axle weight is 14,000 lbs and the track width range is 30”-102”. The 15,000 series chassis dyno’s are also upgradeable for the eddy brake for steady state testing, which can support an additional 850 HP. The 15,000 comes standard with our X Factor Knurling option which provides the highest traction over all other competitors. The optional eddy brake assembly sits directly on the shaft between the two rolls - no need to couple with a belt or universal joint all power is directly transferred from the wheels to the load cell. When equipped with an eddy brake and you are able to perform acceleration, step, sweep and steady-state tests.
The AWD 15,000 Series dyno has an optional Gates Poly Chain® GT3® Belt Linkage system which insures that the front and rear rollers are always spinning at precisely the same road speed.
TORQUE: 15,000 INERTIA: 1800 MAX SPEED: 225 ROLL DIAMETER: 24 AIR REQUIREMENTS: 60 PSI POWER REQUIREMENTS: 220/240 Volt
AWD 15000 Ramps:
AWD 15000 Eddy Brake:
AWD 15000 Gates Poly Chain Belt Linkage:
DC Ramps: DC Ramps are more compact alternative to a traditional 4-post lift. These heavy-duty aluminum ramps are durable and compact. They fold up on top of each other for storage or when not in use. They are lightweight and look great and are stored easily when not in use.
Drag-Tree: Now you can perform 1/4 mile drag simulations on the dyno. Within a 1/10th of a second accuracy the drag tree features dual Pre-stage & Stage bulbs and the flood lamps are spaced in accordance to NHRA/IHRA National Event trees. Our trees are made of 100% structural aluminum with a 25 lb steel base stand.
INCLUDES: 6 foot aluminum tree, Incandescent Flood Lamps, 40 ft cable, 25 lb base stand, cigarette lighter adapter for the eliminator practice tree, and 2 vehicle connections (so you can sit in your race car and practice). Also includes special Dynocom harness that plugs directly into the Dynocom JBOX.
Wireless OBDII : Our wireless module for OBDII Applications provides real time data from the OBDII port on all 1996 and newer vehicles. This data is available to be viewed live in the dynamometer software and is also recorded into the dyno run.
You can view all support channels of the OBDII data, such as spark advance, throttle position, engine coolant temperatures, inlet air temperature, calculated load, and numerous other parameters right along side your dyno results.
DC Fan: Dynocom supports plug-n-play options like an auxiliary output for a fan. Two options available. Pedestal fan for above ground applications and a floor fan for pit options. Plugs directly into the JBOX and turns on/off during dyno runs.
Can be purchased in 110 or 220 Voltage.